11/21/2023 0 Comments Fujifilm x t3 full frameIt becomes -4EV when you activate the Low Light AF mode. The Z6 has a minimum sensitivity of -2EV with an f/2 lens. The Z6 by comparison has 273 phase detection points organised across 90% of the sensor. The phase detection pixels cover the entire surface of the sensor. It features a total of 117 points selectable from a 13×9 grid or 425 points on a 17×25 grid in certain shooting modes. So far, the only Fujifilm camera to have in-body stabilisation is the flagship X-H1.Īlthough both cameras sport an advanced hybrid autofocus system, the X-T3’s appears to be more advanced on paper. Sadly the X-T3 lacks in-body stabilisation so you have to use Fujinon OIS lenses to stabilise your images for hand-held work. When we tried the camera at the UK press event, we were able to take a sharp shot at one second which is an encouraging result. It also offers electronic stabilisation in movie mode, though activating this marginally reduces the field of view. One of the Z6’s key features is its 5-axis in-body stabilisation system which compensates down to 5EV for both stills and video and works in conjunction with Nikkor VR lenses. Nikon justified the decision by stating that the XQD card provides faster writing and reading speeds but given how fast SD cards have become, we would have preferred to see two SD slots instead. In the case of the X-T3, both slots take SD UHS-II compliant cards.įor this reason, it came as a bit of a surprise when the Z6 was announced with just a single slot, and an XQD type rather than the standard SD at that. If there is one feature mirrorless users have been clamouring for over the past few years, it is a dual memory card slot, and we’re happy to report that the main mirrorless manufacturers including Fujifilm, Sony, Olympus, Panasonic and Leica have all responded by giving this feature to their high-end products. With a short flange distance of 16mm, Nikon promises a step up in optical quality and will feature very fast lenses such as the 58mm Noct f/0.95 (due in 2019).įinally the Z6 has a wider ISO range than the X-T3, with native values between 10 and extended values down to 50 and up to 204800. We can start by talking about the Z6 because the it features the brand new Z mount which is visibly larger than the Nikon F mount used for its FX and DX DSLRs. Thank you!ĭifferent camera systems call for different mounts and lenses and the case of the X-T3 and Z6 is no different. To know more about our ethics, you can visit our full disclosure page. If you decided to buy something after clicking the link, we will receive a small commission. Within the article, there are affiliate links. We were not asked to write anything about these cameras, nor were we provided with any sort of compensation. X-T3 vs X-H1 – X-T3 vs X-T20 – X-T3 vs a6500 – X-T3 vs A7 III – X-T3 vs Z6Įthics statement: The information supplied in this article is based on official specifications and our personal experience with Fujifilm and Nikon cameras. To find out more about how they differ, keep on reading! Though there are some differences in their specifications, both cameras can be considered worthy tools for advanced amateurs and professional users. The former inaugurates the full-frame Nikon Z mirrorless system along with the high-resolution Z7, whereas the latter represents a massive step forward for Fujifilm’s X series in terms of speed, autofocus and video performance. Two mirrorless cameras that were announced close together in late 2018 were the Nikon Z6 and the Fujifilm X-T3.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |